Household anti-pollution film products have high desalination rate, strong anti-pollution performance, long life and other notable features. The average stabilized rate of more than 97% of desalination, the service life is 1.5 times the normal import of the film member, suitable for the Northwest region for high quality and heavy metal content of the poor rural market. The main products are 50G, 75G, 100G, applicable to municipal water and groundwater.
100G RO Membrane MH-2012-100
Product Specifications:
| Permeate Flow：GPD(m3/d) | Salt Rejection： % | Applied Pressure: psi(Mpa) | Membrane Active Area：ft2(m2) |
|
100(0.38) |
96 |
65(0.45) |
6.0(0.56) |
Membrane Type:Polyamide composite membrane
Product advantages:
1) Remove most of the hazardous substances;
2) Stable performance, long service life;
3) Easy to store and transport
Applications:
1) Commercial;2) Hospital;3) Laboratory pure water device;4) Household water machine
Size:Dimensions: inch (mm)
A:11.74(298) B:1.72(43.6) C:10.08(256) D:0.68(17) E:0.83(21)
Notice: Permeate flow for individual elements may vary ±15 percent。
The stated performance is initial (data taken after 30 minutes of operation), based on the following conditions:
1) 450PPM NaCl solution,tap water 2) 7.0~8.0 pH Range
3) 77°F (25°C) Operating Temperature 4) 30% Permeate Recovery
Standard Operating Limits:
1) Maximum Operating Temperature: 113°F (45°C) 2) Maximum Applied Pressure: 300psi(21bar)
3) PH Range, Continuous (Cleaning): 3-10 4) Maximum Feedwater SDI (15 mins): 4
5) Maximum Chlorine Concentration: < 0.1 PPM
Limiting Condition For Operation (LCO)
1) Maximum temperature for continuous operation above pH 10 is 95°F(35°C).
2) Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, Mayhoo recommends removing residual free chlorine by pretreatment prior to membrane exposure. Please refer to Mayhoo technical bulletin for more information.
